View CLG-150-20A_4455919.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

150W Single Output Switching Power Supply
Features :
CLG-150
series
Universal AC input / Full range (up to 280VAC) Protections: Short circuit / Overload / Over voltage / Over temperature Built-in active PFC function Cooling by free air convection OCP point adjustable through output cable or internal potential meter Suitable for LED lighting and moving sign applications IP65 design for indoor or outdoor installations 3 years warranty
F
110
SELV
EQUIVALENT
IP65
( for A,B type only )
CLG-150-12 A
A : IP65 rated. Output voltage and constant current level can be adjusted through internal potential meter. B : IP65 rated. Constant current level adjustable through output cable. (Optional) C : Terminal block for I/O connection. Output voltage and constant current level can be adjusted through internal potential meter. (Optional)
SPECIFICATION
MODEL DC VOLTAGE RATED CURRENT RATED POWER CLG-150-12 12V 11A 132W CONSTANT CURRENT REGION Note.4 6 ~12V CLG-150-15 15V 7.5 ~ 15V 9.5A 142.5W 150mVp-p 13 ~ 17V 4.75 ~ 9.5A 2.0% 0.5% 1.0% CLG-150-20 20V 10 ~ 20V 7.5A 150W 150mVp-p 17 ~ 22V 3.75 ~ 7.5A 2.0% 0.5% 1.0% 230VAC /115VAC CLG-150-24 24V 12 ~ 24V 6.3A 151.2W 150mVp-p 22 ~ 27V 3.15 ~ 6.3A 1.0% 0.5% 0.5% CLG-150-30 30V 15 ~ 30V 5A 150W 150mVp-p 26 ~ 32V 2.5 ~ 5A 1.0% 0.5% 0.5% CLG-150-36 36V 18 ~ 36V 4.2A 151.2W 150mVp-p 31 ~ 41V 2.1 ~ 4.2A 1.0% 0.5% 0.5% CLG-150-48 48V 24 ~ 48V 3.2A 153.6W 200mVp-p 40 ~ 56V 1.6 ~ 3.2A 1.0% 0.5% 0.5%
RIPPLE & NOISE (max.) Note.2 150mVp-p VOLTAGE ADJ. RANGE Note.6 9 ~ 13V OUTPUT CURRENT ADJ. RANGE VOLTAGE TOLERANCE Note.3 LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD UP TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE POWER FACTOR INPUT EFFICIENCY (Typ.) AC CURRENT INRUSH CURRENT(max.) LEAKAGE CURRENT OVER CURRENT SHORT CIRCUIT PROTECTION OVER VOLTAGE OVER TEMPERATURE WORKING TEMP.
Note.4
Can be adjusted by internal potential meter or through output cable 5.5 ~ 11A 2.0% 0.5% 1.0% 50ms / 230VAC
3000ms, 80ms at full load
Note.5 90 ~ 280VAC
16ms / 115VAC at full load 127 ~ 396VDC PF 0.98/115VAC at full load and rated output voltage 88% 90% 90% 90% 89% 90%
47 ~ 63Hz PF 0.95/230VAC 88%
2A / 115VAC 1A / 230VAC COLD START 65A/230VAC <2mA / 240VAC LED-Load : CC-mode max. 105% CV-mode max. 110% Electronic-Load : CC-mode max. 110% CV-mode max. 105% Protection type : Constant current limiting, recovers automatically after fault condition is removed
Note.8 Hiccup mode, recovers automatically after fault condition is removed
13.5 ~ 16V 100 10
18 ~ 20V (RTH2) @ full load ; +70 , 10 ~ 95% RH (0 ~ 50 )
23 ~ 27V
28 ~ 34V
33 ~ 36V
42 ~ 48V
57 ~ 65V
Protection type : Shut down and latch off o/p voltage, re-power on to recover Protection type : Shut down o/p voltage, re-power on to recover
Note.7 -30 ~ +55
@ 60% load
WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE
20 ~ 90% RH non-condensing -40 ~ +80 0.03%/
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes UL60950-1, TUV EN60950-1, EN61347-1, EN61347-2-13 approved, IP65 approved (for A,B type only)
I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:1.5KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH EMC EMI CONDUCTION & RADIATION Compliance to EN55015, EN55022 (CISPR22) Class B HARMONIC CURRENT EMS IMMUNITY MTBF OTHERS DIMENSION PACKING
NOTE
Compliance to EN61000-3-2 Class C (>50% load) ; EN61000-3-3 Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN61547, EN55024, light industry level (surge 4KV), criteria A 303.7Khrs min. MIL-HDBK-217F (25 ) 222*68*39mm (L*W*H) 1.0Kg; 12pcs/13Kg/0.49CUFT(CLG-150-A/B) 1Kg; 12pcs/13Kg/0.96CUFT(CLG-150-C)
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Constant current operation region is within 50% ~100% rated output voltage. This is the suitable operation region for LED related applications, but please reconfirm special electrical requirements for some specific system design. 5. Derating may be needed under low input voltages. Please check the derating curve for more details. 6. Type A and type C only. 7. Please refer to derating curve. 8. Please refer to OLP characteristics.
File Name:CLG-150-SPEC 2008-12-23
150W Single Output Switching Power Supply
Mechanical Specification
A Type:(CLG-150-_A)
CLG-150
Case No. 954A
series
Unit:mm
222.2 12 9.6 198.2
9.4
AC/L(Brown) AC/N(Blue) FG (Greed/Yellow)
300 20
Io ADJ.
300 20
+V(Red) -V(Black)
34.2
18AWG 3C
68
14AWG 2C
9.4
Vo ADJ. 4.2 4PL
IP65 rated. Output voltage and constant current level can be adjusted through internal potential meter. (Can access by removing the rubber stopper on the case.)
B Type:(CLG-150-_B)
222.2 12 9.6 198.2 300 20 14AWG 2C
+V(Red) -V(Black) ADJ1(Blue) ADJ2(White)
AC/L(Brown) AC/N(Blue) FG (Greed/Yellow)
300 20
34.2
9.4
68
18AWG 2C
18AWG 3C
9.4
4.2 4PL
IP67 rated. Output constant current level can be adjusted through output cable by connecting a resistor between ADJ1 and ADJ2. Reference resistance value for output current adjustment (Typical) Resistance Open 4.7K 620 82 Short Percentage of rated current Slightly > 100% 100% 75% 50% Slightly < 50%
File Name:CLG-150-SPEC 2008-12-23
38.75
38.75
150W Single Output Switching Power Supply
C Type:(CLG-150-_C)
231.2 15.5 8.5 Io ADJ. 198.2
CLG-150
series
7.5 9.5
I/P
1 2 3
AC Input Terminal Pin No. Assignment
1 2
39
7 68
O/P
7
Vo ADJ. 4.2 4PL
Pin No. 1 2 3
Assignment FG AC/N AC/L
DC Output Terminal Pin No. Assignment
Pin No. 1 2 Assignment +V -V
38.75
Output voltage and constant current level can be adjusted through internal potential meter. (Can access by removing the rubber stopper on the case.)
Block Diagram
Fosc : 100KHz
EMI FILTER & RECTIFIERS PFC CIRCUIT POWER SWITCHING RECTIFIERS & FILTER O.L.P. FG PFC CONTROL DETECTION CIRCUIT O.V.P. +V -V ADJ1 ADJ2 (B Type)
I/P
O.L.P.
PWM & PFC CONTROL
Derating Curve
100
Static Characteristics
fosc : 100KHz
230VAC
100 90
80
230VAC Input only 100VAC
80 70
60
LOAD (%)
40
LOAD (%)
-25 -10 0 15 30 50 55 60 70 (HORIZONTAL)
60 50 40
20
-30
90
100
125
135
145
155 165
175
180
200
230
280
AMBIENT TEMPERATURE ( ) -30 start up possible for 230VAC input
INPUT VOLTAGE (V) 60Hz
File Name:CLG-150-SPEC 2008-12-23

▲Up To Search▲

Price & Availability of CLG-150-20A

	To Download CLG-150-20A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .